Connecting the FaxPress Enterprise to the Network
The FaxPress Enterprise requires an eight-conductor RJ-45 data cable. Use the RJ-45 cable provided by your T1 or E1 carrier.
To connect the FaxPress Enterprise to your network and T1 or E1 line, follow these steps:
| 1. | Connect the network cable to the FaxPress Enterprise server’s network port. |
| 2. | Connect the T1, E1 or PBX line to the FaxPress Enterprise’s T1/E1 port. |
| 3. | Plug the power cable into the FaxPress Enterprise server. |
| 4. | Plug the power cable into a power source. |
To power on the FaxPress Enterprise see the next section,Powering on the FaxPress Enterprise.
|
FaxPress Enterprise & Enterprise Redundant WebHelp
Last Updated: 11/1/2007
E-mail this page |
Castelle 855 Jarvis Drive, Suite 100 Morgan Hill, CA 95037 Toll-free 800.289.7555 Tel 408.852.8000 Fax 408.852.8100 |